Philips 40PFL9704H User Manual page 234

5.5.2 EasyLink Remote Control
First read Connections > EasyLink, before you go on with
EasyLink Remote control.
With EasyLink Remote control, the TV remote control
commands are sent directly to the device you are watching
on TV. There is no need to select the device on the remote
control first.
Caution> This is an advanced setting. Verify if all devices
are suited for this setting. Unsuited devices will not
respond. Try out this function first, before you switch on
EasyLink Remote control permanently.
Downloaded From TV-Manual.com Manuals
To switch EasyLink Remote control on, press h > Setup >
Installation > Preferences > EasyLink Remote control.
Except for the Home h key, all remote control commands
will try to operate the device. Some commands might not
work with the device.
To switch back to TV control, press h and select Watch TV
To control another device, press h and select the other
device.