Samsung DW80F600 User Manual page 23

tzo Ab e,,shoot
CHECK THESE POINTS iF YOUR DISHWASHER...
ii i i iii
No cycle is selected.
Will not starL The power cable is not connected.
The water supply does net work.
The Control Panel is locked.
A circuit breaker is open.
_ r.! g Oo _a"n t V long Cold water is being supplied.
It,s
The door is net closed completely. Check that the door is latched and closed
completely.
Select a proper cycle.
Connect the power cable properly.
Check that the water supply valve is open.
Unlock the child lock, (See page 9.)
Reset the circuit breaker.
Check that the water supply line is
connected to a hot water supply.
with an operation or
Cycle:
You selected an inappropriate
cycle.
The water temperature is low.
Low water pressure.
The water is toe hard.
Dishwasher detergent was net
There are food used.
particles remaining
on dishes.
(Not cleaning
properly,)
il i_i _i i _ ii I ii ii ii ii ii ii ii i
Detergent remains in the
dispenser.
There is no rinse aid.
A nozzle is clogged.
The dishes are improperly loaded.
Tee many dishes have been
loaded.
(Additional time is required to heat cold
water.)
Select a cycle according to the number and
soil level of the dishes, as directed in this
manual.
Connect the water supply line to a hot
water supply.
For best performance, the temperature of
the supplied water should be 120 °F (49 °C).
The water pressure should be between 20
and 120 psi (140 - 830 kPa).
Use a commercial dishwasher cleaner.
Use high-quality, fresh detergent with rinse
aid.
Use automatic dishwasher detergent.
We recommend a powder or gel type
dishwasher detergent.
Make sure large items such as cookie
sheets, cutting boards, or contaners, etc.
are not blocking the detergent dispenser
and preventing it from opening properly.
Rearrange the dishes so they do net
interfere with detergent dispenser
operation.
Check the dispenser and add the rinse aid.
Use liquid type rinse aid.
Clean the nozzle. See page 20.
Rearrange the dishes so they do net
interfere with nozzle rotation and detergent
dispenser operation.
Load only an appropriate number of dishes.
Load your dishes as recommended. (See
page 16.)
DW80F600 DDS1-01555A-01 £N.indd Sec7:23
troubleshooting 23
2013-06-04
CC 11:27:01
I