Dynavin N6 Manual page 17

Reverse
If your car have an ORIGINAL PDC system installed or have an original rear view camera, you can re-
enable these depending on vehicle type.
None :
PDC :
CAM :
PDC+CAM :
If you selected None and use than the reverse gear nothing happens, the screen remains in the
current menu.
If you have selected PDC and you take the reverse gear a new image appears.
Depending on the vehicle and vehicle system it is also possible that the front PDC information is
displayed.
Please note that this systems have only a supporting role. Faulty measurements caused by not
properly built in systems or by environmental effects caused interference can not be compensated by
the system.
These systems do not replace the personal control and the minimum clearances
When no system is installed
If only one PDC system is installed
If only a rear view camera is installed
When both systems are installed in the vehicle.
This is NOT at all Vehicle types and construction
possible. Please refer to the compatibility
information from Dynavin.
17