Panasonic DMC-FX35 Operating Instructions Manual page 24

DMC-FX35EB_mst.book 24 ページ ２００８年１月２８日 月曜日 午前１１時２１分
Preparation
} [SCENE MENU]
[DIAL DISPLAY]
[FORMAT]
• Use a battery with sufficient battery power or the AC adaptor (DMW-AC5E; optional) when
formatting. Do not turn the camera off during formatting.
• If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
~ [LANGUAGE]
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[DEMO MODE]
DEMO
A Jitter detection demonstration
B Movement detection demonstration
•
In playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be
displayed.
• Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.].
Press [MENU/SET] to close [AUTO DEMO].
•
[JITTER, SUBJ. MOVE DEMO.] is an approximation.
•
[AUTO DEMO] has no TV output capability.
24
VQT1P21
Set the screen that will appear when a scene mode has been
selected.
[OFF]: The recording screen in the currently selected scene
mode appears.
[AUTO]: The [SCENE MODE] menu screen appears.
Set whether or not to show the mode dial display when the mode
dial is rotated.
[OFF]/[ON]
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/[ITALIANO]/
[¢]
Select this to display [JITTER, SUBJ. MOVE DEMO.] or the
camera's features.
[JITTER, SUBJ. MOVE DEMO.]
[AUTO DEMO]: The camera's features are displayed as a slide
show.
A
B