Advertisement
FORWARD
SPEED
STANDARD
ENGINE SPEED
POWER CRUISE
ENGINE SPEED
Power Cruise™ II system strives for optimum fuel efficiency and the highest work rate
The Power Cruise™ II system is the next generation of New Holland's new drive concept. The system
automatically adapts engine speed and ground speed of the forage harvester, depending on the actual
crop load conditions. During periods of reduced engine load, headland turns or during idling, the engine
will slow down to improve fuel efficiency. When throughput increases, the engine speed will increase to
keep up with the higher work rate. Under full load, the Power Cruise II system will adapt the forager's
ground speed at constant engine speed, to reach the highest possible work rate. On high horse power
units, a fuel efficiency improvement of up to 15% can be obtained with the new Power Cruise II system.
Full power, even for the
largest attachments
All hydrostatic drive components are
specified for the highest operational
demands. In the standard configuration
the crop attachment is driven through
the HydroLoc™ feed roll drive. For use
with large attachments in demanding
crop conditions there is an optional
second hydrostatic drive that allows
for more power to be transferred to
the crop attachment. This also allows
adapting the attachment speed
independently from the feed rolls.
-15%
HEAVY CROP
METAL DETECTION
LIGHT CROP
Traction power in any field
Built with a high ground clearance - up to
14cm higher than competitive models -
the FR9000 forage harvester manoeuvres
with ease in any field situations.
A differential lock is standard and when
linked to the optional true mechanical
4 wheel drive makes for a powerful
passage through any field conditions.
HEADLAND TURN
7
Advertisement
