Installation - Hyundai DVBH801 Instruction Manual

2. INSTALLATION

Move to Installation and press OK, then a submenu shall be popped up which includes two opti-
ons
• Auto Scan
• Channel Scan
• Tuner Setting
2.1 Auto Scan
• Scan Mode: Free(scan all free channels), All (scan all channels including free and paid ones);
• Search: Press OK to display Scan box and conduct auto scan, or press Menu/EXIT to quit.
The scan box indicates the scan process by percentage of completion; On the top there is
details about Scan Band, Frequency, Demodulation mode, Channel No, Transmission mode
and Guard Interval; Below are the scanned TV channels and radio channels displayed in two
columns.
2.2 Channel Scan
• Scan Mode: By Channel / By Frequency. Either alternative shall be fine for scan.
• Scan Band: VHF/ UHF available.
• Ch No. : Channel 5~12( VHF), and Channel 21~69(UHF)
• Frequency: 174~230MHz(VHF), 470~862MHz(UHF) are available. (The frequency system
can be set automatically according to different regions, and the actual frequency point should
be referred to the practice).
• Band Width: There are three options: 6MHZ, 7 MHZ, and 8 MHZ.
• Search: Move the cursor here and press OK, then a information box shall appear indicating
the scanning process. Pressing Exit allows you to cancel scan and quit current interface. The
scan process box shows the progress of scan by percentage of completion as well as detailed
information about Scan Band, Frequency, Demodulation modes, Channel No, Transmission
mode and Guard Interval, Signal Intensity and Signal Quality;
EN - 56