Information Codes - Samsung DW80F600 Series User Manual

INFORMATION CODES

The Control Panel displays information codes to help you understand what is occurring with your
dishwasher. If you see any of the codes listed below, you should select the Cancel and Drain option, and
then follow the instructions in the Solution column.
If your dishwasher have any problem, below CODE SYMBOL light(s) is(are) blinked.
CODE SYMBOL
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
DW80F600_DD81-01555A-04_EN.indd Sec7:25 DW80F600_DD81-01555A-04_EN.indd Sec7:25
MEANING SOLUTION
Temperature Sensor error
Functional error. With the dishwasher empty, add
detergent, and then run a cycle.
Heater error If the problem continues, go to your house circuit breaker
panel, set the dishwasher's circuit breaker switch to off,
and then contact an authorized Samsung service center.
High temperature heating
error
Check whether the water supply valve is closed, the water
supply is suspended or the water inlet valve or line is
frozen or clogged by foreign particles.
Water supply error
If the problem continues, close the water supply valve, and
then contact an authorized Samsung service center.
Check the temperature of the supplied water. If it is higher
High temperature water
than 176 ˚F (80 ˚C), a functional error may occur with the
supply error
dishwasher.
Over-level water error
Functional error. Close the water supply valve and go to
your house circuit breaker panel, set the dishwasher's
circuit breaker switch to off, and then contact an
authorized Samsung service center.
Leakage error
Button error
Functional error. Turn off the dishwasher and try to start it
again.
If the problem continues, contact an authorized Samsung
service center.
Communication Error
English - 25
2015-08-11 2015-08-11 11:22:57 11:22:57