Philips HC9450/15 Instruction Manual page 31

2 Switch on the appliance.
, The lock symbol starts to flash. You cannot
change the length setting anymore.
Note: If you want to select a different length setting,
switch off the appliance. Swipe on the display to select
the desired length setting and switch on the appliance
again.
Cleaning
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as alcohol, petrol or
acetone to clean the appliance.
Never immerse the appliance in water or rinse it
under the tap.
Note: Only the cutting element and the comb can be
cleaned with water.
1 Make sure the appliance is switched off and
disconnected from the mains.
2 Wipe the housing of the appliance with a dry
cloth.
3 Remove the comb and clean it with the brush
or rinse it under the tap.
Caution: Make sure that the comb is dry before
you reattach it to the appliance.
30
ENGLISH