Tailgate - Ford RANGER Owner's Manual

E134099
1. Engage the base of the tie down point
into the rail channel while holding the
cleat vertically.
2. Slide along the rail until the pin on the
base of the tie down engages in a
desired hole on the rail.
3. Push the tie down in and rotate a
quarter turn clockwise until the tie
down cleat is horizontal and the locking
bezel "snaps" into place.
Removing the Type 3 Tie Down Points
1. Grasp the locking bezel between the
thumb and fingers using the finger
recess.
Load Carrying
2. Pull the bezel away from the rail until
3. Turn the tie down point a quarter turn
2
Load Rest
1
crosswinds and at high speeds.
E131682
Note: Secure luggage or cargo placed on
the load rest with the load rest stoppers.

TAILGATE

in place.
168
the base of the tie down point is fully
disengaged from the rail channel.
anticlockwise until it snaps out of the
rail.
WARNINGS
A loaded load rest alters the vehicle's
center of gravity and aerodynamics.
Take care when cornering, driving in
Do not exceed the permissible gross
weight.
WARNINGS
Do not exceed the maximum
permissible tailgate load of 220 kg.
Vehicles fitted with a tow bar or rear
bumper should not have the tailgate
lowered without the support cables