Macro Function; If There's A Problem - Wizard 8 way Instruction Manual

=
&
X
(2 secs)
=
SHIFT
=
TV
TV
7 7 7 7 1
(eg)
SAT TV
A/V
MACRO
=
SAT
+
MACRO
SAT +
(eg)
Disclaimer
1. Whilst every attempt has been made to include in the WIZARD as many manufacturers and
TV/VCR/SAT/CD/HIFI devices as possible, older/less common models may not be in the WIZARD library.
This also applies to new models for which code information is not yet available. Neither does the WIZARD
support RF and non-standard infrared remote controlled equipment.
2. The WIZARD cannot operate functions which are not supported by your TV/VCR/SAT in the first place.
3. The manufacturer reserves the right to continuously update the code library and improve the control
functionswithout notification.
Record your DEVICE CODES here . .1.) . . . . . . . . . . . .2.) . . . . . . . . . . . .3.) . . . . . . . . . . . .
4.) . . . . . . . . . . . . 5.) . . . . . . . . . . . .6.) . . . . . . . . . . . .7.) . . . . . . . . . . . .8.) . . . . . . . . . . . .
10

Macro function

The Macro function allows several functions to be executed with just one key
operation.
1. Press the Power
comes on.
NB: When reconfiguring a SHIFT Function key, you must first press the SHIFT
key. The STATUS LED then changes to GREEN.
2. Press required DEVICE KEY. and the DEVICE KEY will light up.
3. Key in the Macro set-up code for your device: TV-77771, VCR-77772,
SAT/CTV-77773, AUX-77774.
4. Record your Macro by selecting the functions you wish to carry out when
Macro is selected. Make sure each function performs correctly when entered.
e.g.: To switch on your SAT and TV, and put the A/V on TV, press SAT; POWER;
TV; POWER(or a number key if your TV only switches on via the number key-
pad); A/V.
NB: Each Macro can only execute a maximum of 6 commands at a time.
5. Press the Macro key to store the macro. The DEVICE KEY will go out and
the macro is programmed.
6. To play back the Macro of a particular device, press the device key and
then the Macro key. NB: Since each Device key can have its own macro
sequence, you can choose to have as many as 8 different macros pro-
grammed.
If there is a problem! (P = Problem, S = Solution)
P: The WIZARD LED does not operate.
S: Replace the batteries.
P: The WIZARD does not operate when the keys are used.
S: Check the batteries and replace if necessary, also ensure you point the
WIZARD directly at your device.
P: The WIZARD does not perform the required action/operate your device?
S: Check the operating code and change if necessary.
P: A function key operates the wrong function.
S: You may need to check the code again.
Your brand is not mentioned in the code list?
S: Try using the LIBRARY SEARCH method to set-up your remote.
and Mute keys together until the STATUS LED