Panasonic DMP-BDT100 Operating Instructions Manual page 37

Recommended audio output setting
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the
items.
Press [FUNCTION MENU]
"Sound" Set each item
For details of the each item, refer to page 29.
Setup menu
"Dolby D/Dolby D
+/Dolby TrueHD"
"Digital
Audio "DTS/DTS-HD"
Output"
"BD-Video
Secondary Audio"
"PCM Down Conversion"
"Downmix"
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
If connected to TV via the OPTICAL or AUDIO OUT terminal, these settings have no effect.
*1
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*2
If the connected equipment that does not support 96 kHz, set to "On".
*3
If the connected equipment that supports the virtual surround function, set to "Surround encoded".
*4
select "To Others"
Example of connected equipment
Receiver with
TV via HDMI HD audio
*1
via HDMI
"PCM" "Bitstream"
"PCM" "Bitstream"
"Off"
No effect No effect
"Stereo" No effect
[OK] select "Setup"
Receiver without
decoder HD audio decoder
*2 *2
via HDMI
"PCM"
"PCM"
"Off" "Off"
No effect
No effect
[OK] select
Receiver via OPTICAL
"PCM"
"PCM"
"Off"
"Off"
*3
"Stereo"
*4
37
(37)
VQT2U34