Philips HC7450/80 User Manual page 11

Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as alcohol, petrol or acetone to clean the appliance.
Never immerse the appliance in water or rinse it under the tap.
Note: Only the cutting element and the comb can be cleaned with water.
1 Make sure the appliance is switched off and disconnected from the
mains.
2 Wipe the housing of the appliance with a dry cloth.
3 Remove the comb and clean it with the brush or rinse it under the
tap.
4 Press the release button (1). The cutting unit comes off the appliance
(2).
5 Clean the cutting unit with the brush or rinse it under the tap.
6 Clean the inside of the appliance with the brush.
Never immerse the appliance in water or rinse it under the tap.
7 Shake off excess water. To reattach the cutting unit, insert the lug of
the cutting unit into the guiding slot.
8 Insert the lug of the cutting unit into the guiding slot (1) and push
the cutting unit back onto the appliance (2).
EnglisH
11