Cradlepoint USB-Host to Ethernet Adapter PS6U1UHE User Manual page 8

o If Establish TCP/IP Connection is also checked, the application is
run after the conn
o Tapping Browse displays the Select
Application dialog.
If necessary, you can browse for the
application and enter an
parameters.
Pressing OK accepts the entries and
returns to the ori
the new entries displayed.
Pressing X (Close) returns to the original
settings dialog.
o Application to be Launched text box –
displays the path
selected application.
o Params – Displays any command-line
application.
o Serial Port Baud Rate – Selects the baud rate for the serial
connection b
connection is 115,200 baud. Set the appropriate rate for your
o
Query cradle for DNS domain – Some cradles have the abi
present the DNS domain name to eConnect. Checking this will direct
eConnect to query the cradle for the domain name and store that in
the terminal registry.
When you are done, press OK at the top of the screen.
Step 6 – Finishing
Connect the MC1000 to the PS6U1UHE device and to your
in the next sectio
power outlet.
Turn on the power to the MC1000 and place it into the cradle to start a
synchronizatio
so).
ection is established.
Checking this option automatically un-checks the
"L aunch ActiveSync" option, if it was checked.
ginal settings dialog with
and filename of the
etween the terminal and the cradle. The default
This option is enabled only if Establish TCP/IP
C onnection is checked.
Up
ns. Make sure the MC1000 cradle is also plugged into an active
n action or launch an application (if you have it configured to do
CradlePoint, Inc
CradlePoint USB-Host to Ethernet Adapter User Guide
y command-line
parameters associated with the
cradle.
lity to
network, as described
5