Storing, Recalling, And Erasing Measurement Data - Healthy Living BWB-5007 Owner's Manual

Storing, recalling, and erasing
Storing data
After each measurement, the systolic and diastolic rates, pulse
rate and the time & date will be automatically stored.
* The memory holds data for the latest 40 measurements in each
of 3 memory zones. If more than 40 measurements are entered,
the memory will automatically clear out the oldest data.
Recalling data
a. Press the " " or " " button to select the memory zone.
b. Press the "MEMORY" button to get your stored memory data.
* If there is no data in the memory nothing will appear.
* If there is data in the memory, the first reading
will be an average of the last three recorded set
of measurements (systolic and diastolic pressure
and pulse rate).
c. Press the "MEMORY" button again and the latest
recorded set of measurements will appear along
with the recording time and date.
d. Press the " " button to read the next set of
stored data. The data displayed starts with the most recent
reading and continues backwards to the oldest.
* If your memory readings are out of range of your preset per-
sonal alert levels, they will flash as explained in Setting
Date, Time and Levels.
* No Irregular Heartbeat Detector Record will be stored in mem-
ory.
measurement data

Storing, recalling, and erasing measurement data

19