Pickup Settings; Calibration; Factory Default; Exit - Universal MX-3000i Operating Manual

MX-3000i C T S
OLOR OUCH CREEN

Pickup Settings

You can set your MX-3000i to only turn on
when touched, or every time you move it.
The Pickup Screen

Calibration

If you like, you can calibrate where you tap
by running the calibration. You will need a
pen top or PDA stylus to do this. Do not
attempt to calibrate using your fingers.
The Calibration Screen

Factory Default

WARNING! Only use this button when
instructed to by Technical Support. It resets
the memory of the MX-3000i to the factory
condition. All your programming will be lost!

Exit

The Default Screen
When you have finished adjusting Settings,
simply tap the EXIT button to return to
normal operation.
The Exit Button
Page 7