Philips Norelco S7370 Instructions Manual page 10

ENGLISH
18
Shaving
◗ For best results on skin comfort, pre-trim
your beard if you have not shaved for 3 days
or longer.
C
Turn shaver ON by pressing the on/off
1
button once. Shave against the direction
of beard growth using only circular
movements.
Stretch your skin with your free hand so
2
blades can lift and cut whiskers. Gently
press shaver to skin so the floating heads
can follow the contours of your face.
DO NOT press too hard. Too much
pressure can pinch the skin into the combs.
Turn shaver OFF by pressing the on/off
3
button once.
Clean the shaver after each use (see
4
chapter 'Cleaning').
C
Place the shaver in the SmartClean System
5
to protect shaver heads.
Wet Shaving
You can also use the shaver on a wet face with
shaving foam or gel.
C
Apply some water to your skin.
1
C
Apply shaving foam or gel to your skin.
2
Rinse the shaving unit under the tap
3
to ensure that the shaving unit glides
smoothly over your skin.
Press the on/off button once to switch on
4
the shaver.
C
Move the shaving heads in circular
5
movements over your skin.
NOTE: Rinse the shaver under the tap regularly
to ensure that it continues to glide smoothly over
your skin.
Dry your face and thoroughly clean
6
the shaver after each use (see chapter
'Cleaning').
NOTE: Make sure you rinse all foam or gel off the
shaver.
C
7 Place the shaver in the SmartClean System
to protect heads.
ENGLISH
19