Alarm Report When Requested; Npc (Nuisance Prevention Circuitry) - Viper 5706V Owner's Manual

Hide thumbs Also See for 5706V:

Table of Contents

Zone # (led flashes)

Alarm Report when requested

The Alarm Report displays the two most recent alarm triggers depend-

ing on the system state when requested. When disarmed, the report

will display text to identify the two most recent triggers since the ve-

hicle was last driven. When armed, the report will display text to

identify the two most recent triggers since the system was armed.

Note

The Alarm Report clears when ignition is turned ON.

NPC monitors all alarm zones and, if any are triggered excessively,

bypasses them until corrected. If a point of entry (trunk, hood, door)

is left open following a forced entry, it is bypassed. It becomes active

again only after being closed.

Bypassed sensors automatically reset after one hour and after the

vehicle is driven. Disarming then re-arming the alarm does not reset

bypassed sensors.

Table of Zones

Zone Name

Trunk

Shock Sensor

Door

Sensor 2

Ignition

Hood

Table of Contents