Led Designations; Port Leds - NETGEAR 748TP) Hardware Installation Manual

GS700TP Hardware Installation Guide
Figure 3-4 illustrates the NETGEAR GS724TP Smart Switch back panel:
Figure 3-4
The back panel contains the following:
• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for
accommodating the supplied power cord.

LED Designations

This section provides an explanation for the following LED types:
•

Port LEDs

• System LEDs
Port LEDs
The following table describes the port LED designations.
Table 3-1. Port LEDs
Port
24/48-10/100/1000 Ports
- One LED/Port
3-21
LED
SPD/Link/ACT LED
v1.0, November 2007
Designation
• Off - No 10/100Mbps link is established on the port.
• Solid Green - A valid 1000Mbps link is established
on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port at 1000Mbps.
• Solid Yellow - A valid 10/100Mbps link is
established on the port.
• Flashing Yellow - Packet transmission or
reception is occurring on the port at 10/100Mbps.
Physical Description