Advertisement
RECHARGEABLE TRIMMER
OPERATING INSTRUCTIONS
Before the appliance is used for the first time it should be
charged for 16 hours.
CHARGING THE RECHARGEABLE BATTERY
Connect the plug-in transformer to the power supply (fig1).
Ensure the appliance is switched off, otherwise it cannot be
charged (fig2b).
Place the appliance on the charging stand. Whilst charging the
charging indicator will illuminate.
The charger indicator will go out when removed from the
charging stand.
We recommend you only charge your appliance when its
performance has deteriorated noticeably.
Longer charging times do not damage the appliance.
It takes approximately 16 hours for the appliance to be fully
charged.
Use only the charging transformer supplied with this kit, DO
NOT attempt to charge with any other transformer.
OPERATION OF RECHARGEABLE BATTERY
Using the ON/OFF switch, switch on the appliance (fig 2a)
Switch off immediately after use.
ATTACHMENT COMB
Your appliance is supplied with a variable attachment comb.
The attachment comb has five settings. The further the
attachment comb is pressed on to the appliance the shorter
the cutting length. In this way the cutting length can be varied
between 3-6mm (fig 3).
To attach the comb, attach on to the appliance in the direction
of the arrow until it locks into position (fig 4a).
To remove push the comb in the direction of the arrow (fig 4b)
CHANGING THE BLADE SET
The blade set can be removed by pushing the blade set away
8
Hide quick links:
Advertisement
