Advertisement

Quick Links

X230
User Manual
V1.0
Disclaimer and Warning
Thank you for purchasing X230.
Please read this instruction manual carefully before using this product. By using this product, you
hereby agree to this disclaimer and signify that you have read it in full.
Please strictly adhere to this manual as the manufacturer has no control over the use of the product or
it's set up or final assembly once sold.
Modification of this craft, such as using other motors , escs , propellers, ect. will result in no liability on
our part. No liability will be assumed or accepted for any resulting damage or injury.
For personal safety and because electrical signal interference problems could occur, please do not fly
this craft inside as it may become unstable.
Any parts of this manual is subjected to change without prior notice.
Any problems with this frame please contact with us or authorized agents.
Introduction
Brief introduction
The X230 mutlicopter kit consists of a multicopter, remote control (TX) and other parts necessary for
flight are included .
The forward looking HD FPV camera located at the nose of the craft can transmit up to 1000 meters,
(within operating range of the TX ).
Character
Frame:
Built-in 120° wide angle and 1920 x 1080P HD camera to get the high quality shooting;
Camera connect with TS832 wireless 5.8G transmitter directly to achieve wireless transmission in aerial
photography;
Equipped with 2200mAh smart flight battery. Choose the high energy density cell and industry-lead-
ing advanced BMG(battery management system);
Flip 360° steadily;
Real-time transmission for FPV action video.
Remote control:
Built-in video transmitter to improve the transmission quality and reliability of communication;
Equipped with camera and operation button to control easily.
Flight attentions
1. Please do not fly in bad weather such as rain, snow, sleet etc. as the craft is not water proof and will
not tolerate getting wet .
2. Please make sure all the parts work properly without aging or damage before flight.
3. Please ensure the propeller and arm mounted properly and firmly before flight.
4. Please be safety minded and do not fly near people , pets, trees, objects, buildings, high voltage
wires ect..
5.Please us the included battery.
6. Please do not close to or touch the motor or propeller once operation.
7. Please us the included parts with this frame only.
8. Please do not fly in the no-fly zone with legal and regulation stated.
9. This product is recommended for use by experienced hobbyists recommended age for use by
beginner is 14 years of age or older.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X230 and is the answer not in the manual?

Questions and answers

Summary of Contents for DYS X230

  • Page 1 Introduction Brief introduction The X230 mutlicopter kit consists of a multicopter, remote control (TX) and other parts necessary for flight are included . The forward looking HD FPV camera located at the nose of the craft can transmit up to 1000 meters, (within operating range of the TX ).
  • Page 2: Table Of Contents

    Content Box list Multicopter 230 1Set Remote control 1Set Disclaimer and warning Introduction Flight attentions Content Box list Battery preparation ABS propeller 5030 X2set 4 pins connection wire Remote control 5030R Multicopter 5030 Propeller installation Balance charger X1pcs Charger cable X1pcs Battery installation Remote control preparation Remote control usage...
  • Page 3: Remote Control

    Remote control Suppose to control flying maneuver within 1000 meters communication distance with assorted remote Socket control. Equipped with function keys to control camera and multicopter to shoot freely. The real-time shooting can be showed on the mobile device(monitor) by remote control with built-in Smart battery function 5.8G wireless transmitter and multicopter with built-in 5.8G transmitter.
  • Page 4: Multicopter

    Multicopter Propeller installation Multicopter comes with propeller 5030, Black CCW and silver CW for propeller nut. Propeller 5030 5030R Built-in 120° wide angle camera, connect the webcam with TS823 wireless 5.8G transmitter directly for FPV wireless transmission. Sketch Built-in high capacity rechargeable lipo battery to achieve 10mins high speed flight time. Mounting position Mount black prop nut on the motor Mount silver prop nut on the motor...
  • Page 5: Remote Control Preparation

    Remote control preparation ON & OFF Unfold the remote control antennas and set position. The best communication range for remote control Built-in 3S 1800mAh rechargeable battery, check the current by battery indicator light. signal as below: Turn on remote control as followings, 1.
  • Page 6: Flight

    1. Keep the copter on the flat and wide ground, pilot should stand behind the copter. 2. Turn on remote control and copter smart battery. 3. Connect mobile device(monitor) with copter X230. 4. The copter can be safe flight while the green indicator light keep blinking. Start the motor with operation rod.
  • Page 7: Appendix

    1/3” CMOS 3.4 MP (Aptina AR0330CS) Effective Pixels 3.4Mp (3:2) and 3.15Mp (4:3)still images Multicopter Image Sensor 2304(H) x 1536(V): (entire array): Model X230 5.07mm(H) x 3.38mm(V) Output Pixels Weight(include battery) 500g 2048(H) x 1536(V) (4:3, still mode) 2304(H) x 1296(V) (16:9, sHD mode) Max.

Table of Contents