Advertisement
The Setup Wizard (continued)
The setup wizard will help you configure the basic settings of the system in
a few steps. The settings will not take effect until you click the [Finish] button in the
last page.
Click the "Run Wizard" button to start.
Click
Run Wizard
Enter system information
1. Enter the server name in the "Server name:" filed so you can quickly access the
storage of this system either from a Windows or a Mac OS by searching the
server name.
2. Enter the new password. If you don't enter a password, it will remain blank as the
default value.
3. Click "Next."
Click Next
6
Advertisement
