How To Manually Configure Your Internet Connection - NETGEAR WGM124 Setup Manual

How to Manually Configure Your Internet Connection

You can manually configure your router using the menu below, or you can allow the Setup Wizard
to determine your configuration as described in the previous section.
ISP Does Not Require Login
Figure 3-1: Browser-based configuration Basic Settings menus
You can manually configure the router using the Basic Settings menu shown in
these steps:
Connect to the wireless router by typing http://www.routerlogin.net in the address field of
1.
your browser, then click Enter.
For security reasons, the wireless router has its own user name and password. When prompted,
2.
enter for the router user name and
admin
case letters.
Click Basic Settings on the Setup menu.
3.
If your Internet connection does not require a login, click No at the top of the Basic Settings
4.
menu and fill in the settings according to the instructions below. If your Internet connection
does require a login, click Yes, and skip to step 5.
Enter your Account Name (may also be called Host Name) and Domain Name.
a.
These parameters may be necessary to access your ISP's services such as mail or news
servers.
Connecting the Router to the Internet
NETGEAR Wireless Router Setup Manual
ISP Does Require Login
for the router password, both in lower
password
December 2004
Figure 3-1 using
3-3