Configuring Static Routes - NETGEAR RP614 v4 Reference Manual

1. From the Main Menu of the browser interface, under Advanced, click on Dynamic DNS.
Figure 4-7
2. Register for an account with one of the dynamic DNS service providers whose names appear
in the 'Service Provider' box. For example, for dyndns.org, go to www.dyndns.org.
3. Check the Use a dynamic DNS service check box.
4. Select your dynamic DNS Service Provider from the Service Provider box.
5. Type the Host Name (or domain name) that your dynamic DNS service provider gave you.
6. Type the User Name for your dynamic DNS account.
7. Type the Password (or key) for your dynamic DNS account.
8. If your dynamic DNS provider allows the use of wildcards in resolving your URL, you may
select the Use wildcards check box to activate this feature. For example, the wildcard feature
will cause *.yourhost.dyndns.org to be aliased to the same IP address as yourhost.dyndns.org
9. Click Apply to save your configuration.

Configuring Static Routes

Static Routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
Advanced Configuration of the Router
RP614v4 Cable/DSL Router Reference Manual
v3.1, June 2008
4-13