Download  Print this page

Citizen Quartz windsurfing MC6XXX Instruction Manual

Hide thumbs
   

Advertisement

Quick Links

CITIZEN QUARTZ
Windsurfing
Model No. MC6XXX
Cal. No. D28A/D28B
• INSTRUCTION MANUAL
CTZ-B6910
1. Explanation of Displays and Buttons
Although the display may vary according to the
model, the operating procedure is the same.
2. Features
This watch is a digital watch equipped with numerous
funcions including time display, calendar, alarm,
stopwatch, timer 1, timer 2, and a chime.
In addition, it also has an EL (electroluminescence)
internal illumination function that enables the display to
be viewed in the dark.
3. Switching the mode
• Pressing button
switches mode in the manner
M
shown below.
• The date is displayed for as long as button
pressed while the watch is showing the nornal time
display.
4. Name and Functions of Buttons and Displays
5. Setting the Time and Calendar
1) Pressing and holding button
second while in the time and calendar display
causes the seconds digits to flash enabling the
seconds to be reset
2) Press button
• When the seconds displayed are from 30 seconds
to 59 seconds, pressing button
seconds digits to zero and advances the minutes
by 1.
3) Each time button
portion of the display will change as shown
below. Press button
display you want to correct flashes.
4) Press button
the display.
• Pressing and holding button
flashing digits to advance rapidly.
5) After making the correction, press button
return the watch to the normal time diplay.
is
A
When using a 12-hour clock for displaying time,
make sure AM or PM is set correctly.
If the calendar is set to a date that does not exist
(such as February 30), the date will automatically
be corrected to the first day of the following
month as the watch is returned to the normal time
display.
The calendar does not have to be corrected on
the last day of the month.The watch performs this
automatically. The watch does use February 29
however.
Pressing button
returns the watch to the normal time display.
If a button is not pressed for 1 minute while in the
setting state, the watch will automatically return to
the normal time display.
in for at least 1
B
to reset the seconds.
A
A
is pressed, the flashing
B
until the digits of the
B
to correct the flashing digits of
A
in will cause the
A
while in the setting state,
M
returns the
to
M

Advertisement

loading

  Summary of Contents for Citizen Quartz windsurfing MC6XXX

  • Page 1 CITIZEN QUARTZ 4. Name and Functions of Buttons and Displays Windsurfing Model No. MC6XXX Cal. No. D28A/D28B • INSTRUCTION MANUAL CTZ-B6910 5. Setting the Time and Calendar 1) Pressing and holding button in for at least 1 second while in the time and calendar display 1.
  • Page 2: Setting The Alarm

    6. Use of Alarm and Chime 7. Use of the Stopwatch • Once the alarm has been set to on (set time is The stopwatch function is able to measure and displayed), the alarm will sound at the same time display time in 1/100 second increments up to a each day until it is cancelled (set to off).
  • Page 3 * If the watch is switched to a different mode while the stopwatch is measuring time and then switched back to stopwatch mode, the display will return to measuring as it was prior to changing modes. However, exceptions to this are as follows: (1) When the stopwatch is measuring split time, the watch will return to stopwatch measurement.
  • Page 4 (4) Pressing button during measurement forcibly interrupts timing and returns the watch to the initial set time (flyback) after the timer begins to count down again. * If the watch is switched to a different mode while in the initial timer set time, the timer is running, the timer is stopped or in the autochronograph mode, and then is switched back to Timer 2 mode, the watch will display each state as it was...
  • Page 5 Doing so may result in deterioration of the watch, dealer or Citizen Service Centre for repair. Leaving such as deformation of plastic parts. the watch in such a state will allow corrosion to •...
  • Page 6 13. Specifications • Caliber No.: D28A, D28B • Type: Digital quartz watch • Accuracy: Within ±45 seconds/month on average (when worn at +5 – +35 C) /41 – 95 F) • Operating temperature range: 0 – 50 C (32 – 122 F) •...