NETGEAR RANGEMAX WNR3500L User Manual page 32

RangeMax™ Wireless-N Gigabit Router with USB WNR3500L User Manual
To use a PIN to add a WPS client:
1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with
its default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
2. On the wireless router main menu, select Add a WPS Client (computers that will connect
wirelessly to the wireless router are clients), and then click Next. The Add WPS Client screen
displays:
Figure 2-7
3. Select the PIN Number radio button.
4. Go to the client wireless computer. Run a WPS configuration utility. Follow the utility's
instructions to generate a PIN. Take note of the client PIN.
5. From the wireless router Add WPS Client screen, enter the client PIN number, and then click
Next.
• The wireless router tries to communicate with the client for 4 minutes.
• The wireless router WPS screen displays a message confirming that the client was added
to the wireless network. The wireless router generates an SSID, and implements WPA/
WPA2 wireless security if the wireless settings on the router are not configured.
6. Note the new SSID and WPA/WPA2 passphrase for the wireless network. You can view these
settings on the Wireless Settings screen. See
WPA/WPA2 Wireless Security" section.
Safeguarding Your Network
Step 3 of the "Configuring WPA, WPA2, or
v1.0, November 2009
2-12