Battery; Charging The Battery - Samsung galaxy tabpro s User Manual

Battery

Charging the Battery

Charge the battery before using it for the first time
or when it has been unused for extended periods.
Important: Use only Samsung-approved chargers,
batteries, and cables. Samsung accessories are
designed to maximize battery life. Using other
accessories may invalidate your warranty and may
cause damage.
1. Connect the USB cable to the USB power
adapter, and then plug the end of the USB cable
into the USB charger/Accessory port.
Caution: Connecting the charger improperly may
cause serious damage to the device. Any damage
caused by misuse is not covered by the warranty.
2. Plug the USB power adapter into an electric
socket.
3. After fully charging, disconnect the device from
the charger. First unplug the charger from the
device, and then unplug it from the electric
socket.
Note: Failure to unplug the wall charger before you
remove the battery can cause damage to the device.
Basics
Viewing the Remaining Charging Time
► While charging, on the taskbar, tap
Settings > System > Battery saver.
Note: The actual charging time may vary depending
on the status of your device and the charging
conditions. The remaining charging time may not
display when you charge the device in very cold or
very hot conditions.
Reducing the Battery Consumption
Your device provides various options that help you
conserve battery power.
•
When you are not using the device, switch to
sleep mode by pressing the Power key.
•
Activate battery saver mode.
•
Close unnecessary apps.
•
Deactivate the Bluetooth feature when not in use.
•
Deactivate the Wi-Fi feature when not in use.
•
Deactivate auto-syncing of apps.
•
Decrease the backlight time.
•
Decrease the screen brightness.
7
Start >
Battery