NETGEAR Powerline HD Ethernet Adapter HDX101 User Manual page 30

HDX101 Powerline HD Ethernet Adapter User Guide
b. Click the OK button to reset the device. The software will display a message to indicate
whether or not the operation succeeded.
Figure 2-21
c. Click the OK button to dismiss the message box and continue.
2. Once all remote devices have been reset, repeat step 1 for the local device. After the device is
reset and the software finishes scanning, check that the device table lists all devices in the
network again.
Figure 2-22
2-16 Installing the Powerline HD Ethernet Adapter
v1.2, February 2007
Default
settings