Overview Of Vpn Configuration; Client-To-Gateway Vpn Tunnels; Gateway-To-Gateway Vpn Tunnels - NETGEAR FVG318 Reference Manual

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual

Overview of VPN Configuration

Two common scenarios for configuring VPN tunnels are between a remote personal computer and
a network gateway and between two or more network gateways. The FVG318 supports both of
these types of VPN configurations. The VPN firewall supports up to eight concurrent tunnels.

Client-to-Gateway VPN Tunnels

Client-to-gateway VPN tunnels provide secure access from a remote PC, such as a telecommuter
connecting to an office network (see Figure 5-1).
FVG318
Figure 5-1
A VPN client access allows a remote PC to connect to your network from any location on the
Internet. In this case, the remote PC is one tunnel endpoint, running the VPN client software. The
VPN firewall on your network is the other tunnel endpoint. See "Setting Up a Client-to-Gateway
VPN Configuration" on page 5-5 to set up this configuration.

Gateway-to-Gateway VPN Tunnels

Gateway-to-gateway VPN tunnels provide secure access between networks, such as a branch or
home office and a main office (see Figure 5-2).
Figure 5-2
5-2 Basic Virtual Private Networking
v1.0, September 2007