See Figs.6 And - JVC KD-S790 Service Manual

QQ
2.1.3 Removing the heat sink 3 7 63 1515 0
(See Fig.5)
(1) Remove the two screws C and two screws D on the left
side of the main body.
2.1.4 Removing the bottom cover

(See Figs.6 and 7)

• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly and heat sink.
(1) Turn over the body and release the two joints c, two joints
d and joint e.
CAUTION:
Do not damage the main board when releasing the joint e us-
ing a screwdriver. (See Figs.6 and 7)
TE
L 13942296513
2.1.5 Removing the rear bracket
(See Fig.8)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
(1) Remove the three screws E, three screws F and two
screws G on the back of the body.
(2) Remove the rear bracket.
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
D
Joint c
Joint e
Q Q
3 6 7 1 3 1 5
Bottom cover
Joint c
F
co
E
.
9 4 2 8
C
Heat sink
Fig.5
Bottom cover
Joint d
Fig.6
0 5 8 2 9 9 4 2 8
Joint d
Joint e
Fig.7
Rear bracket
m
F
Fig.8
(No.49788)1-5
KD-S790
9 9
9 9
G
E