Page 2
Hoover service: To ensure the continued safe and efficient the appliance or any maintenance task. operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service This appliance can be used by children aged from 8 years and engineer.
GETTING TO KNOW YOUR CLEANER HANDLE PET HAIR & ALLERGEN REMOVER HOLDER* Effortless cleaning PET HAIR & ALLERGEN with your new REMOVER* Hoover HOSE HOOK HOSE bIN RELEASE bUTTON bIN HANDLE bIN LID CORD HOOK CREVICE TOOL/ DUSTING bRUSH HOSE...
PREPARING TO USE YOUR CLEANER POWER SWITCh SETTING Switching on and off 1. Using a cross head screw driver, remove the screw from rear of the cleaner main body. 2. Insert the handle into the main body of the cleaner. 1.
CLEANING TOOLS REMOvAL AND EMPTYING OF ThE DUST CONTAINER imporTanT: When using cleaning tools, the cleaner must be kept To remove the dust container in the upright position, particularly when cleaning stairs. from the cleaner, press the bin release button. To Detach the cleaning Attach crevice tool to the hose end connector.
Page 6
MAINTAINING ThE DUST CONTAINER AND FILTERS Cleaning the Separator ( pEriodiC mainTEnanCE iS rEquirEd To mainTain opTimum pErformanCE) Remove the dust container as described Turn the dust container lid anti- on the previous page. clockwise to unlock and lift to take out.
IMPORTANT: Switch cleaner off ChANGING ThE bELT OR bRUSh CLEARING A bLOCKAGE and remove plug from electricity supply before checking the brushes or removing hood. IMPORTANT: Switch the cleaner off and If your cleaner is not picking up efficiently, the remove the plug from electricity supply belt or brush (or both) may need replacing, but before dismantling cleaning.
Page 8
7. Has the cleaner overheated? If so, it will take about 45 minutes to reset itself. HOSE D156 - 35601698 If there is any doubt call the Hoover Service Office for advice. They may be able AGITATOR y36 - 35601697 to assist you over the telephone.
Need help?
Do you have a question about the WR71WR01001 and is the answer not in the manual?
Questions and answers