Setting Location - Whistler WS1080 User Manual

Setting Location

Your scanner can select services to scan based on your
location. Press MENU and scroll to "Set Location" and
press the  key.
You can specify your location by City, County or ZIP
Code. Scroll to the desired method and press the 
key. If you select City or County, the scanner will prompt
you for your State. Use the or key to select the first
letter of your State, then press the /II/SEL key. Scroll
to your state and press the  key. Use the or key to
select the first letter of your City or county, then press
the /II/SEL key. Scroll to your City or County, then
press the  key.
Select County:
First letter: A
SEL = Done
If you select ZIP Code, the scanner will prompt you to
enter your five-digit ZIP Code. Use the or key to
adjust each digit, then use the  or  key to select
each digit. When you are done, press the /II/SEL key.
ZIP Code
00000
moves cursor
 
SEL=OK MENU=BACK
NOTE: Although you can program multiple locations, to
get maximum scanner performance its best to program
only 1 location or ZIP code. Scanning multiple locations
will cause missed transmissions due to the scanner
searching for out of range frequencies.
You can accept a preselected set of Default Types for
your location, or you can specify Custom Types (see
next section). To select the Default Service Types, press
the  key, then the /II/SEL key to import the Default
Set of Service Types for that City or County. Wait for the
Import process to end, then press the /II/SEL.
-Confirmation-
Really do import operation?
SEL=Yes SKIP=No
To perform additional imports, press the /II/SEL key
and proceed as before. Press the SKIP key to return to
the Main Menu.
16