JVC KD-R971BT Instruction Manual page 14

BLUETOOTH®
Auto Pairing
When you connect the following device to
the USB input terminal, pairing request (via
Bluetooth) is automatically activated.
KD-R971BT / KD-R871BT: iPhone/ iPod touch/
Android device
KD-R774BT / KD-R771BT: Android device
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is
turned on.
– [AUTO CNNT] is set to [ON]. ( 13)
– JVC MUSIC PLAY application is installed on
the Android device ( 7) and [AUTO MODE] is
selected ( 8).
10
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• For KD-R971BT:
The buttons will blink in the color you have selected in [RING COLOR]. ( 11)
For KD-R871BT / KD-R774BT / KD-R771BT:
The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. ( 11)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 11)
During a call:
• For KD-R971BT:
The buttons stop blinking and illuminate in the color you have selected in [RING COLOR]. ( 11)
For KD-R871BT / KD-R774BT / KD-R771BT:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To
First incoming call...
Answer a call
Reject a call
End a call
While talking on the first incoming call...
Answer another incoming call and hold
the current call
Reject another incoming call
On the faceplate
Press or the volume knob.
Press and hold or the volume knob.
Press and hold or the volume knob.
Press or the volume knob.
Press and hold or the volume knob.