Super Stubble Top Tips - BaByliss 7898U User Manual

• Switch the super stubble on by pressing the ''power on'' button. The
LED will illuminate and the blades will start to move.
• If you are looking for an ultra-close finish, you can use the trimmer
without the comb guide. This will give you an extremely short cut.
IMpOrtANt: please note when using the trimmer without the comb
guide, the cutting length will be below 0.4mm. The length setting
shown on the LED screen will no longer be relevant when the comb
guide is detached.

Super Stubble top tips

• Use on clean, dry hair.
• If possible, when using for the first time, try and grow your facial hair
for a few days before cutting so you can trim down to a level that is
best for you.
• Set the cutting length as required.
• It is always best to start cutting with a longer length first, then trim
again if the length is longer than desired.
• Hold the super stubble against the hair, the teeth of the comb guide
should be pointing upwards and should be flat against the face.
• Move the trimmer upwards through the hair, a little at a time, against
the direction of hair growth. The floating and contouring head will
follow the curves of your face to ensure both accuracy and comfort.
• The super stubble will work most effectively when cutting through
the hair at its own speed – never force through the hair. You may
experience a little resistance when trimming the neck area, where hair
is thicker and grows in many different directions. This is completely
normal.
• Just like shaving, extra time should be given when trimming under
the neck area, as again this is where hairs grow in many different
directions.
• Never switch the trimmer off whilst in the hair.