Inserting And Removing The Card (Optional)/The Battery - Panasonic Lumix DMC-FT3 Basic Operating Instructions Manual

Inserting and Removing the Card
(optional)/the Battery
•
Check that this unit is turned off.
•
Confirm that there is no foreign object.
•
We recommend using a Panasonic card.
1:Slide the [LOCK] switch B, and
release the lock.
2:Slide the release lever A and
open the side door.
•
Always use genuine Panasonic batteries
(DMW-BCF10E).
•
If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Being careful about the
battery orientation, insert all the way
until you hear a locking sound and
then check that it is locked by lever
C. Pull the lever C in the direction
of the arrow to remove the battery.
Card: Push it securely all the way
until you hear a "click" while being
careful about the direction in which you insert it. To
remove the card, push the card until it clicks, then pull the
card out upright.
D: Do not touch the connection terminals of the card.
Close the side door until it clicks,
and then lock the [LOCK] switch by
sliding it toward [1].
•
Confirm that the red part on the
lever
is not showing.
release
21
(ENG) VQT3L33