Observe Wireless Location And Range Guidelines; What Is In The Box; Default Wireless Settings - NETGEAR WN121T User Manual

NETGEAR Next 300 Mbps Wireless USB 2.0 Adapter WN121T User Manual
Note: Windows XP users must have SP2 installed or the KB822603 Hot fix for SP1,
which fixes the USB 2.0 Host controller driver. Go to the following link to install
the Hot fix:

Observe Wireless Location and Range Guidelines

Computers can connect over wireless networks indoors at a range which vary significantly based
on the location of the computer with the Wireless USB 2.0 Adapter. For best results, avoid
potential sources of interference, such as:
• Large metal surfaces
• Microwave ovens
• 2.4 GHz Cordless phones
In general, wireless devices can communicate through walls. However, if the walls are constructed
with concrete, or have metal, or metal mesh, the effective range will decrease if such materials are
between the devices.

What Is in the Box

The product package should contain the following items:
• NETGEAR Next 300 Mbps Wireless USB 2.0 Adapter WN121T
• Installation Guide
• NETGEAR CD, including:
– Driver and Configuration Utility Software
– NETGEAR Next 300 Mbps Wireless USB 2.0 Adapter WN121T User Manual (this
document)
• Warranty and Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product.

Default Wireless Settings

If this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you need the
wireless network and wireless security settings that are already defined.
1-2
http://www.microsoft.com
v2.0, February 2007