Page 1
Warmer Operating Instructions Model Number 7937 | REF 7937-X For warming premoistened cloth and hair care products manufactured by Sage Products LLC. PLEASE READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY PRIOR TO OPERATING THIS WARMER.
14. Keep cord away from heated surfaces. 15. The warmer is to be serviced only by qualified service personnel. If there are no external or user-serviceable fuses, contact Sage Products for repair or adjustment. For external or user-serviceable fuses, check them and replace if necessary. If new fuses do not correct the condition, or if fuses continue to blow, contact Sage Products for repair or adjustment.
STATUS DISPLAY SYSTEM Your new warmer is equipped with a status display system that is designed to provide information on the heating status of the packages in the unit. The status lights are activated when a package is placed in a slot in the warmer. They alert the user when a package has reached the target temperature by showing a steady green light.
Voltage used must be the same as that specified on equipment rating label. 6. The warmer must be on a SEPARATE CIRCUIT. No other appliance, with the exception of another Sage Warmer, should share the circuit with the warmer. If it does, the branch circuit fuse may blow, the circuit breaker may trip or products may warm slower than expected.
= ON, O = OFF) 1. To install warmer, position unit on a sturdy, flat surface, such as a counter top or cart provided by Sage Products. For proper grounding, plug cord into AC receptacle marked “hospital only” or “hospital grade.” Turn power switch on back panel to ON position.
FreeRTOS Software: This device uses FreeRTOS, version 5.1.1, which is licensed under a modified GPL. For a copy of the FreeRTOS source code, or details of the modified GPL, please visit www.FreeRTOS.org. You may also obtain a copy of version 5.1.1 of the FreeRTOS source code from Sage Products Customer Service by emailing customerservice@sageproducts.com or calling 1-800-323-2220.
TECHNICAL SPECIFICATIONS Product Code 7937 (US Configuration) 7937-X (EU configuration) Input Rating 120 V AC / 60 Hz / 7 AMP 240 V AC / 50 Hz / 3.5 AMP Target Temperature (B Configuration) Adjustable between 100°F and 125°F (38°C - 52°C) Adjustable between 100°F and 125°F (38°C - 52°C)
Page 8
SAVE THESE INSTRUCTIONS FOR PROPER USE OF YOUR WARMER. READ ALL SAFETY CAUTIONS AND OPERATING INSTRUCTIONS. http://www.sageproducts.com/products/warmers-microwave/warmers.cfm Sage 12-Count Warmer ® Reorder # 7937 | REF 7937-X Manufactured for: Sage Products LLC Accessories: 3909 Three Oaks Road • Cary, IL 60013 Comfort Personal Cleansing Cart ®...