Basic Installation Instructions; For Windows Xp Users Installing A Wg311 - NETGEAR WG311 Installation Manual

Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311

Basic Installation Instructions

Use the procedure below that corresponds to the version of Windows you are using.

For Windows XP Users Installing a WG311

Install the WG311 software.
Power on your computer, let the
a.
operating system boot up completely,
and log in as needed.
Insert the NETGEAR 54 Mbps Wireless
b.
PCI Adapter WG311 Resource CD into
your CD-ROM drive. The CD main page
shown at the right will load.
Click the "Install Driver & Utility" link.
c.
Follow the InstallShield Wizard steps,
d.
and click Finish when done to restart
your computer.
2-4
WG311 Resource CD
Note: If this page does not automatically appear,
browse the root of the CD and double-click on
autorun.exe to display this page.
InstallShield Wizard
Note: If a Windows XP Certification warning appears,
click Continue Anyway to proceed.
Basic Setup