NETGEAR ProSafe FVX538 FVX538 FVX538 Reference Manual page 32

ProSafe VPN Firewall 200 FVX538 Reference Manual
Table 2-1. Internet connection methods (continued)
Connection Method
BigPond Cable
DHCP (Dynamic IP)
Fixed (Static) IP
If Auto Detect does not find a connection, you will be prompted to check the physical
connection between your firewall and the cable or DSL line or to check your Router's MAC
address (see "Setting the Router's MAC Address" on page
3. Click WAN Status at the top right of the screen to verify WAN Port 1 connection status. Click
Connect if connection not already present.
Figure 2-2
4. Set up the traffic meter for WAN 1 ISP if desired. See
Desired)" on page
Note: At this point of the configuration process, you are now connected to the
Internet through WAN port 1. But you must continue with the configuration
process to get the complete functionality of the dual WAN interface.
2-4
Data Required
Login Username, Password), Login Server.
No data is required.
Static IP address, Subnet, and Gateway IP; and related data supplied by
your ISP.
2-7.
v1.0, August 2006
2-5).
"Programming the Traffic Meter (if
Connecting the FVX538 to the Internet