ChargingTheShaver; UsingTheShaver - Panasonic ES-LV61 Operating Instructions Manual

Charge

Chargingtheshaver

1
1
Inserttheappliancepluginto
theshaver.
2
2
PlugintheACadaptorintoa
householdoutlet.
•
Turn the shaver off before attaching.
•
Charging is completed after approx. 1 hour.
You cannot operate the shaver while charging.
ReadingtheLCDpanelwhencharging
The LCD panel shows the remaining battery capacity from 0% to
100%, in 10% increments.
While charging
The indicators glow.
•
After charging is completed, turning the power switch ON with
the shaver plugged in will cause Battery capacity and Charge
status to light up and then turn off after 5 seconds. This shows
that the shaver is fully charged.

1
After charging is completed
Battery capacity and Charge status
will light up and then turn off after 5
seconds.
•
Recommended ambient temperature for charging is 5‑5 °C. The
battery may not charge properly or at all under extreme low or
high temperatures.
The indicators on the LCD panel blink when there is a problem
with charging.
•
When charging the shaver for the first time or when it has not
been in use for more than 6 months, the indicators on the LCD
panel may not glow. It will eventually glow if kept connected.
2
Shave

Usingtheshaver

1
1
Rotatethelockringto
unlockthepowerswitch
andpressthepower
switch.
Page3
•
We recommend using the shaver in an ambient temperature
range of 5 ‑ 5 °C. If used outside this range, the appliance may
stop operating.
Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver back
and forth in the direction of your beard. You may gently increase
the amount of pressure as your skin becomes accustomed to
this shaver. Applying excessive pressure does not provide a
closer shave.
2
2
Holdtheshaver
asillustrated
aboveandshave.