NETGEAR WG111T User Manual page 39

a. Make sure the WG111T software is installed and the WG111T is fully inserted in a USB
port in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
Figure 2-11
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
c. In the Security section, select WPA-PSK [TKIP].
For more information, see the link to
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply and then click Close to exit the Smart Wizard.
NETGEAR 108 Mpbs Wireless USB 2.0 Adapter WG111T User Manual
matches exactly what is configured in the access point.
v2.0, February 2007
"Wireless Communications" in Appendix B.
2-15