Using Your Meat Grinder - Breville vtp141 User Manual

using your meat grinder

Always make sure the appliance is switched off and unplugged from the mains
supply socket before assembling or disassembling. Never attempt to grind bones
or other hard items
1. Ensure that your meat grinder has been assembled correctly and check that the on/
off reverse switch is in the off position. Plug your meat grinder in to the mains supply
socket.
2. If necessary, cut the food into pieces that will fit easily into the feed head and place it
onto the feed tray. Make sure that meat does not contain any bones.
3. Place a suitable container under the grinder to catch the minced food.
4. Switch on the grinder by setting the switch to the on position.
5. Use the food pusher to gently push the food into the feed tube.
Never feed food into the appliance by hand. ALWAYS use the food pusher.
Important notes
• When your meat grinder is operated for the first time, there may be a slight odour.
This represents no danger to the user and does not indicate a defect in your meat
grinder. The odour will soon disappear.
• The grinder must ALWAYS be switched on before adding food.
• If the motor slows or stops, this may be due to jammed food. Immediately switch
the grinder off, then set the switch to the reverse position to push the food in the
opposite direction.
• If this does not cure the problem, switch off the grinder and disconnect it from the
mains supply. Disassemble the grinding head and clean the internal parts.
8