Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or changes.
1.0 milliamp value, a rework is required to eliminate the chance of a shock hazard . AC VOLTMETER 0.15u To Metal Parts 1500 Earth Ground ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 5
“ MURA “ Do not touch the surface of the polarizer . Take out the monitor with cushion Take out the monitor by grasping the LCD panel. That may cause “ MURA“. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 6
Correct methods : Incorrect Methods : Place the monitor on a clean & soft foam pad . Place the monitor on foreign objects . That could scratch the surface of panel ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
640 x 350, 640 x 400, 640 x 480, 720 x Resolution Compatibility 400, 800 x 600, 832 x 624, 1024 x 768 Exclusions Not compatible with interlaced video ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 8
Power Saving Operation(Method) VESA DPMS Signaling On Mode < 30 W (Typ) / 35 W (max) Power Consumption Active Off < 1 W Recovery Time On Mode = N/A, Active Off < 3 sec ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 9
*2. Any timing not in the list, it should display as normal or show on “OUT OF RANGE” OSD message without blanking. Primary Presets 1024X768 @ 60Hz User Presets Number of User Presets (recognized timings) Available: 10 presets total in FIFO configuratio ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 10
Remark : All the short cuts function are only available while OSD off Function descriptions Main Menu Controls The Main Menu OSD include most of control functions. Please refer to APPENDIX B (Main Menu OSD Table) for the detail. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 11
Note 1: Status bar indicating Power Button lock or unlock is in progress and when complete it will indicate “Power Button Locked” Note 2: Power should only be lockable in the “On State” ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 12
Item Defaults Contrast 720x400/640x400 720x400 Brightness 100% Resolution Notice Enabled Color Temperature 6500K Volume Sharpness Balance OSD H. Position Treble OSD V. Position Bass OSD Time Out 15 Sec OSD Background Enabled ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 13
Model number Hannstar HSD150MX15-A00/01 Type Active Matrix TFT, TN technology Active Size 15" Pixel Arrangement RGB Vertical Stripe Pixel Pitch 0.297 mm Glass Treatment Anti-Glare, Hard-Coating (3H) # of Backlights 2 CCFL ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 14
100 degrees (Typ) / 65 degrees (Min) @ CR>10 Vertical Viewing Angle Response Time On/Off Typical = 16 ms 10%-90% @ Ta=25°C Maximun = 24 ms 3.5 mg per lamp Mercury Panel Defects Please see Panel Quality Specifications. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 15
Peaking Performance : Peaking is not adjustable Raster Artifacts ● Video Artifacts : No visible streaking, sag, or smearing artifacts when driven by the specified video cards in the primary mode and after user adjustment to best condition ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 16
Front Bezel Color The reference for the Front Bezel is the Silver (VE510s) / Midnight-Gray (VE510b) color chip provided by ViewSonic The color difference between any two cabinet components shall be less than 0.80 “Delta E”, in the 1976 CIE L*a*b Colorspace.
Page 17
(between front bezel and panel glass) Mechanical Specifications ● Screen Printed Parts : Artwork shall be provided by ViewSonic. The ViewSonic Bezel Graphics Specification, VSC_S_299 v1.c (2003) controls logo position ● Bird Logo : The ViewSonic Bird Logo Plate Specification, VSC_S_286 v1.b controls bird logo position ●...
Page 18
Mounting hole spacing = 75mm x 75mm Compatibale with the mounting screw [4mm x 10mm; 0.7mm pitch] and [4mm x 8mm; 0.7mm pitch] Hinge Screw: 4mm x 10mm; 0.7mm pitch (Can be used for wall mounting) ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Also a shortcut to display the Orange=power saving Also a shortcut to auto image adjust Contrast adjustment control screen. Power On / Off Displays the Main Menu or exits the control screen and saves adjustments. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 20
ViewSonic VE510s/b Main Menu Controls Adjust the menu items shown below by using the up and down buttons. A. Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image.
SIGNAL Red Video DB15HD Green Video Blue Video None Ground (DDC return) Red GND Green GND Blue GND +5V (for DDC) Sync GND None DDC Data Horizontal Sync Vertical Sync DDC Clock ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 22
< 1Watts Amber <1Watts 3.3 Acceptable timing If the timing is within following specification, this LCD display can automatically function with a certain position. Horizontal: Sync frequency: 30~82 kHz Vertical: Sync frequency: 56~75Hz ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 23
640 x 480 @ 60Hz (VESA) 640 x 480 @ 67Hz (MAC II, Apple) 640 x 480 @ 72Hz (VESA) 640 x 480 @ 75Hz (VESA) 800 x 600 @ 60Hz (VESA) ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 24
Vertical Frequency (max) = 75Hz Horizontal Frequency (min) = 30KHz Horizontal Frequency (max) = 62KHz Maximum Supported Pixel Clock = 90MHz (108-125) Monitor Description: -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Monitor Name: VE510b (127) Checksum OK. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 25
800 x 600 @ 75Hz (VESA) 832 x 624 @ 75Hz (MAC II, Apple) 1024 x 768 @ 60Hz (VESA) 1024 x 768 @ 70Hz (VESA) 1024 x 768 @ 75Hz (VESA) ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 26
Vertical Frequency (max) = 75Hz Horizontal Frequency (min) = 30KHz Horizontal Frequency (max) = 62KHz Maximum Supported Pixel Clock = 80MHz (108-125) Monitor Description: -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Monitor Name: VE510 SERIES (127) Checksum OK. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 27
800 x 600 @ 75Hz (VESA) 832 x 624 @ 75Hz (MAC II, Apple) 1024 x 768 @ 60Hz (VESA) 1024 x 768 @ 70Hz (VESA) 1024 x 768 @ 75Hz (VESA) ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 28
Vertical Frequency (max) = 75Hz Horizontal Frequency (min) = 30KHz Horizontal Frequency (max) = 62KHz Maximum Supported Pixel Clock = 80MHz (108-125) Monitor Description: -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Monitor Name: VE510 SERIES (127) Checksum OK. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 29
RAM. using general purpose input/output (GPIO) pins. Pin number Pin Name Pin Number Usage P5.2 Key / Power on ,off P3.4 NV_RAM (U4) SDA P3.5 NV_RAM (U4) SCL P5.4 Key_down P5.5 Key_right ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 30
DC to DC converters. The device consists of an internal temperature compensated reference, comparator, controlled duty cycle. Oscillator with an active current sense circuit. Desired output voltage are determined by the fixed output function, the output voltage are 2.5 Volts for scaler power. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 31
90~260 Vac , 47 ~ 63Hz Input Current <1.5A Inrush Current <100A@120Vac Standby Input Voltage 12Vdc Output Voltage Regulation +/-5% Output Ripple & Noise 120mVp-p Rate Output Current <2.5A Turn-on delay <3secs ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
1.2.2 Connect CN2 of Fixture to VGA Cable. 1.2.3 Connect VGA Cable to Analog Input of monitor. 1.2.4 Turn on the Monitor power. 1.2.5 Copy the “LM5ISP.exe” to NB. Cable Fixture F/W or DDC Update ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 33
LM5ISP Firmware Update 1.3.1 Run the “LM5ISP.exe” Program ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 34
1.3.2 Select the model name of Option Page ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 35
1.3.3 Read Firmware data from HEX File and then press “Action” ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 36
2.2.2 Connect CN2 of Fixture to VGA Cable. 2.2.3 Connect VGA Cable to Analog Input of monitor. 2.2.4 Turn on the Monitor power. 2.2.5 Copy the “LM5ISP.exe” to NB. Cable Fixture F/W or DDC Update ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 37
LM5ISP DDC Update 2.3.1 Run the “LM5ISP.exe” Program ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 38
2.3.2 Select the model name of Option Page ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 39
2.3.3 Read DDC data from Monitor. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 40
2.3.4 Key in the New Serial Number and then press “Enter” key ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 41
1.2.4 Connect VGA Cable to Digital Input of monitor through the “DVI to VGA Adapter”(Digital DDC Update). 1.2.5 Turn on the Monitor power. 1.2.6 Copy the “QEDID.exe” and “QEDID.txt” to NB in the same folder. Cable Fixture Digital Analog ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 42
1.3.3 Read DDC data from Monitor ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 43
1.3.4 Key in the New Serial Number.and then press “Enter” key 1.3.5 Confirm the “Success” Message. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 44
• If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible . (The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD display.) ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
6500K — Adds red to the screen image for warmer white and richer red. 5400K — Adds green to the screen image for a darker color. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 46
Vertical moves the screen image up and down. (Horizontal Size) adjusts the width of the screen image. H. Size Vertical size is automatic with your LCD display. NOTE: ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 47
15 seconds, the display screen disappears. returns adjustments to the original factory Memory Recall settings if the display is operating in a factory Preset Timing Mode listed in this user guide. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
5 seconds. With or without this setting, after a power failure, your LCD display’s power will automatically turn ON when power is restored. • Power Button Unlock: Press and hold [1] and the down arrow again for 10 seconds. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Press ▲ Button to make current option high. Press ▼ Button to make current option low. (4) Information Page: Press [2] Button to show the informatio n. Press [1] Button to exit Information page. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 50
1) Language Select Item Press [2] Button to enter Language Select item. Press [1] Button to exit Langua ge Select item. Press ▲ Button to the previous option or ▼ Button to the next option. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 51
Press ▲ Button to the previous option or ▼ Button to the next option. (7) Memory Recall Page Press [2] Button to do the memory recall function. Press [1] Button to exit the page. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 52
Select “Factory Mode” and press [2] button to enter (1) Auto Burn Press [2] to use the chipset internal pattern for hot running monitor panel and inverter Press Power button to exit and power off immediately (2) Factory Reset ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 53
In-System Programming setting which is not allowed to be changed by dealers or resellers (5) Spread Spectrum Adjust chip set internal frequency spread effect for EMI testing. Also not allowed to be changed by dealers or resellers --- Will cause EMI failure in the field. ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 54
Full black Full black Pattern 7 5-cycle pattern 5-cycle pattern Check the BU Pattern 8 1-dot pattern 1-dot pattern Check the flicker Pattern 9 Pattern 1 Pattern2 Pattern 3 Pattern4 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 55
Pattern 5 Pattern6 Pattern 7 Pattern 8 Pattern 9 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 56
1.3 Put the cushion on the monitor (Figure.3) 1.4 Put the monitor into carton & put all the accessories into the carton .Then close the carton . (Figure.4) Figure 3 Figure 4 Power cord ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 57
2.4 Take of the screws (Figure 8) Figure 7 Figure 8 2.5 Remove the back cover (Figure 9) 2.6 Take off the screw on the VGA cable (Figure 10) Figure 9 Figure 10 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 58
832 x 624 @ 75Hz, 49.7kHz 1024 x 768 @ 60Hz, 48.4kHz 1024 x 768 @ 70Hz, 56.5kHz 1024 x 768 @ 72Hz, 58.1kHz 1024 x 768 @ 75Hz, 60.0kHz 1024 x 768 @ 85Hz, 68.67kHz ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 59
Figure 14 2.11 T ake out the screws on M/B & remove the cable between M/B & power board (Figure 15) 2.12 Remove the M/B out (Figure 16) Figure 15 Figure 16 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 60
Separate the bezel & panel (with BKT) & remove the cable on panel (Figure 19) 2.16 Take off the L/R BKT & remove the L/R BKT . (Figure 20) Figure 19 Figure 20 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Check Scalar Module Change Cable Output CN1 From(Power module)CN110 to (Scalar/B)CN1 Pin 1,2 = 12V? Check Power Button Check Cable From Scalar/B(CN6) Open? Change Cable to Button/B(CN1) Change Switch or Button Board ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 62
Check CN5 to Panel Signal Output board OK? Check X’ Tal 24.576Mhz and 11.059Mhz Change Y1 or Y2 Check or Change Cable or Panel Check H,V SYNC? Change VGA Cable Change U7 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate repeated cross checks of each item between this version and ViewSonic Corporation Confidential –...
Page 64
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate repeated cross checks of each item between this version and ViewSonic Corporation Confidential –...
Page 65
BOM LIST (VE510s-3 for "Hanstarr (25ms) Panel") ViewSonic Model Number: VS10040-3W Rev: 1a Serial No Prefix: PUC Item ViewSonic P/N Ref. P/N Description Location Universal number# Q'ty 1L5VCZUVS70 L5VC-3 LCD MONITOR(HAN,USA)S #N/A #N/A 29L9I0MB033 L9I M/B ASSY(FOR L5VC-3 REALTEK)RTD2013 #N/A...
Page 66
BOM LIST (VE510b-3 for Hanstarr (25ms) Panel) ViewSonic Model Number: VS10040-4W Rev: 1a Serial No Prefix: PUB Item ViewSonic P/N Ref. P/N Description Location Universal number# Q'ty 1L5VCZUVS02 L5VC-3 LCD MONITOR(HAN,USA)B #N/A #N/A 29L9I0MB033 L9I M/B ASSY(FOR L5VC-3 REALTEK)RTD2013 #N/A...
Page 67
BOM LIST (VE510s-3 for "Hanstarr (16ms) Panel") ViewSonic Model Number: VS10040-3W Rev: 1b Serial No Prefix: PUC Item ViewSonic P/N Ref. P/N Description Location Universal number# Q'ty #N/A 1L5VCZUVSM7 L5VC-4 LCD MONITOR(HAN,USA)S #N/A 29L9I0MB050 L9I M/B ASSY(FOR L5VC-4 REALTEK)RTD2013 #N/A...
Page 68
BOM LIST (VE510b-3 for Hanstarr (16ms) Panel) ViewSonic Model Number: VS10040-3W Rev: 1b Serial No Prefix: PUB Item ViewSonic P/N Ref. P/N Description Location Universal number# Q'ty #N/A 1L5VCZUVSE3 L5VC-4 LCD MONITOR(HAN,USA)B #N/A 29L9I0MB050 L9I M/B ASSY(FOR L5VC-4 REALTEK)RTD2013 #N/A...
Page 69
BOM LIST (VE510s-3 for "SVA (16ms) Panel") ViewSonic Model Number: VS10040-3W Rev: 1a Serial No Prefix: PUC Item ViewSonic P/N Ref. P/N Description Location Universal number# Q'ty #N/A 1L5VCZVVS75 L5VC-5 LCD MONITOR(SVA,USA)S #N/A 29L9I0MB076 L9I M/B ASSY(FOR L5VC-5 RTD2013)SVA #N/A...
Page 70
BOM LIST (VE510b-3 for "SVA (16ms) Panel") ViewSonic Model Number: VS10040-3W Rev: 1a Serial No Prefix: PUB Item ViewSonic P/N Ref. P/N Description Location Universal number# Q'ty #N/A 1L5VCZVVS08 L5VC-5 LCD MONITOR(SVA,USA)B #N/A 29L9I0MB076 L9I M/B ASSY(FOR L5VC-5 RTD2013)SVA #N/A...
Page 71
8. Exploded Diagram And Spare Parts List Exploded Parts List (VE510s-3 for "Hanstarr (25ms) Panel") ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 72
Exploded Parts List (VE510b-3 for "Hanstarr (25ms) Panel") ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 73
Exploded Parts List (VE510s-3 for "Hanstarr (16ms) Panel") ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 74
Exploded Parts List (VE510b-3 for "Hanstarr (16ms) Panel") ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 75
Exploded Parts List (VE510s-3 for "SVA Panel") ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 76
Exploded Parts List (VE510b-3 for "SVA Panel") ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
22P/6 2004/6/17 DAN217K/NC DAN217K/NC DAN217K/NC IN-V 100/6 VGAVS RED+IN GREEN+IN BLUE+IN Z3.3V 2K/6 22P/6 IN-H IN-V DDC_SDA DDC_SCL Z5.6/NC Z5.6/NC Z5.6/NC Z5.6/NC ViewSonic Corporation Model VGA AND TMDS INPUT Title Date Rev: ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 80
22/6 BXDIO TCON9 22/6 YCLK TCON10 22/6 YDIO TCON11 22/6 RTD_SCLK RTD_SDO/SDI TEST POINT SDIO1 SDIO2 SDIO3 RTD_SCSB 100/6 RESET ViewSonic Corporation Model DDC_SDA MCU AND BOTTON CONTROL DDC_SCL Title Date Rev: ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 81
P6.4 P4.2 P6.5 R124 100/6 P6.6 P3.1/TXD DDC_SDA PWR_SEL R125 100/6 DDC_SCL P6.7 P3.0/RXD MTV312M64 R109 4.7K/6 5DVCC VCC12 R108 4.7K/6 HEADER 4 6.8K/6 2K/6 ViewSonic Corporation Model SCALAR Title Date Rev: ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 82
RSDS_CON30 NC/FEB_1206 BXDIO YCLK YDIO If panel is 3.3V LVDS IF, L30 must add the part 2004/4/14 PANEL_3VCC FEB_0805/NV FEB_0805/NC FEB_0805/NC FEB_0805/NC PANEL_5_12VCC ViewSonic Corporation RSDS_CON50/NC Model PANEL INTERFACE Title Date Rev: ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 83
VCPU 10K/6/NC NC/CX201209805/8 3DVCC MMBT3906 CX201209805/8 1K/6 DSUB_5V 1N4148 1N4148 4.7K/6 C100 C101 0.1u/6 NC/6 R143 1U/8 4.7K/6 SN7002E VBRI ViewSonic Corporation 3DVCC MMBT3906 R144 Model POWER 4.7K/6 Title DGND Date Rev: ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 84
11. PCB Layort Diagram 11.1 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 85
11.2 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 86
11.3 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 87
11.4 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Page 88
11.5 ViewSonic Corporation Confidential – Do Not Copy VE510s-3_VE510b-3...
Company: Add.: Fax: Tel: E-mail: After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile 1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes (marc.maupin@viewsonic.com) ViewSonic Corporation Confidential – Do Not Copy...