SM-501 – Installation
Specifications subject to change without notice. | INST APD0191 D140113 | USA 150303 | Page 1 of 7
INSTALLATION AND MAINTENANCE
SM-501-N
SM-501-P
NOTICE: The information contained in this document is the most current available at the time of shipment of accompanying product, and is subject to
change without notice. Future references should always be made to the most current revision of this document. The information contained in all this
document should be considered before installing or using the product. Any example applications shown are subject to the most current enforced local/
national codes, standards, approvals, certifications, and/or the authority having jurisdiction. All of these resources, as well as the specific manufacturer
of any shown or mentioned related equipment, should be consulted prior to any implementation. For further information or assistance concerning this
product, contact us. Specifications subject to change any and all documentation without notice.
A COPY OF THESE INSTRUCTIONS SHOULD BE LEFT WITH THE EQUIPMENT UNTIL
INSTALLATION BY ALL TRADES IS FULLY COMPLETE. FOLLOWING FINAL
INSPECTION, A COPY SHOULD BE LEFT WITH THE OWNER/USER.
12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | relevantsolutions.com/inteccontrols
SM-501 SERIES
DUCT SMOKE DETECTORS
INSTRUCTIONS
Ionization Type, 4-Wire Duct Smoke Detector
Photoelectric Type, 4-Wire Duct Smoke Detector