Water Drain Hose; Connecting To The Mains Supply - Sandstrom S814WMB13 Instruction Manual

INSTALLATION
Connecting the Water Supply Hose
1. Attach the hose to a tap, and tighten the
plastic joint by hand.
2. Open the tap slowly and check that there are
no leaks around the joint.
The joint is subject to water pressure.

Water Drain Hose

Points to remember:
• Don't twist, pull out or bend the drain hose.
• Your washing machine should be no more than 85cm from the drain outlet.
Draining to a sink or wash-basin
• Secure the drain hose in position, so it can't drop out of the basin.
• Don't block the basin's drain outlet, and make sure that the drainage through it is sufficient.
• Don't let the tip of the drain hose dip into the drained water, as this can cause the water to flow
back into the washing machine.
U-Shape Holder

Connecting to the Mains Supply

For your safety:
• Do not use a mains plug adapter or extension cable.
• If the mains cable or mains plug are damaged, stop using them and call a qualified technician for
assistance.
• Mains cord of your washing machine is equipped with an Earthed plug. This plug should always be
inserted to an earthed socket capable of supplying 13 Amps. If you don't have such a socket and
fuses in your house, please call a qualified electrician.
10
Draining to a wash-basin
3/4"
min. 10 mm
Draining to a drain hose
3/4"
min. 10 mm
Plastic joint