Huawei Quidway S1700-24-AC User Manual & Installation Quick Start page 3

Connecting PGND Cables and Power Cables
连接保护地线和电源线
Connect the PGND cable.
连接地线。
Connect the AC power cable.
连接交流电源线。
● Do not connect power cables when the device is powered on, so as to avoid injuries.
● Make sure that the protection grounding cable of the device is grounded.
● The S1700-24-AC can use only AC power supply.
● 严禁在设备安装和布线完成前向设备供电。
● 确定设备保护地线接地。
● S1700-24-AC只支持交流电源。
Laying out Cables
布放线缆
● Lay out and bundle power cables, optical fibers, and Ethernet cables separately, with the distances in between longer than 10 cm.
● 电源线与信号线缆的间距要大于10厘米。
During the cabling, if the quantity of cables is rather great, you can route the cables in the cabinet first, and then install connectors
to the cables.
布线时，如果线缆数目比较多，为了布线更方便，可以先不做线缆接头，先将线缆在机柜中布置好，再做与设备连接的线缆接头。
6