f.
WLAN module (see
g.
Optical drive (see
h.
Keyboard (see
i.
Hinge covers (see
j.
Base enclosure (see
k.
System board (see
l.
Fan/heat sink assembly (see
m.
Top cover (see
Remove the smart card reader:
Remove the metal shield, and then lift the smart card reader to remove it.
▲
Reverse this procedure to install the smart card reader.
WLAN module on page
Optical drive on page
Keyboard on page
48).
Hinge cover on page
55).
Base enclosure on page
System board on page
Fan and heat sink assembly on page
Top cover and TouchPad on page
44).
46).
57).
59).
65).
Component replacement procedures
61).
75