Table of Contents
Advertisement
An Instrction of Car Modeling Electric Speed Controler
Functions and Features:
1. Specially designed for RC car, with excellent start-up, acceleration and linearity features.
2. Compatible with sensorless brushless motor.
3. Use top quality electronic components to enhance the current endurance ability of the ESC.
4. 2 running modes(Racing mode and Forward/Backward mode)
5. 4 steps of maximum reverse force adjustment
6. Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of
drag-brake force adjustment and 4 steps of initial brake force adjustment.
7. 4 start modes(also called "Punch") from "soft" to "very aggressive".
8. Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat
protection / Throttle signal loss protection / Motor blocked protection.
9. 8 steps of timing adjustment
10. Waterproof and dustproof.
11. Easily program with only one button and compatible with pocket-size program card.
Specifications
Constant Current: 80A
Burst Current: 270A
Resistance: 0.185ohm
Suitable Car: 1/8 Buggy/Truggy
BEC Output: 5.75V/3A
Motor Type: Sensorless Brushless Motor
Dimension: 58x46x35(the height of fan is not included)
Weight: 144(without wires)
The LED Status in Normal Running
1. In normal use, if the throttle stick is in the neutral range, neither the red LED nor the green LED will
light.
2. The red LED lights when the car is run forward or backward and it will flash quickly when the car is
braking.
3. The green LED lights when the throttle stick is moved to the top point(end point) of the forward zone
or backward zone.
Alert Tones
1. Input voltage abnormal alert tone: The ESC begins to check the input voltage when power on, if it is
out of the normal range, such alert tone will be emitted: "beep-beep, beep-beep"(There is 1 second
time interval between every "beep-beep" tone.)
2. Throttle signal abnormal alert tone: When the ESC can't detect the normal throttle signal, such and
alert tone will be emitted: "beep, bee, beep" (There is 2 seconds time interval between every "beep"
tone).
Protection Function:
1. Low voltage cut-off protection: If the voltage of a lithium pack is lower than the threshold for 2 seconds,
the ESC will cut of the output power. Please note that the ESC can not be restarted if the voltage of
each lithium cell is lower than 3.5V.
2. Over-heat protection: When the temperature of the ESC is over 95 Celsius degree for 5 seconds, the
ESC will cut off the output power. You can disable the over-heat protection function for competition race
3. Throttle signal loss protection: The ESC will cut off the output power if the throttle signal is lost for 0.2
second.
-6-
Advertisement
Table of Contents
