D-Link DSL-504G Quick Installation Manual page 9

Configuring the Router (continued)
Static IP Address Connections
If you selected the Static IP Address connection type, change the WAN IP Address, WAN
Subnet Mask, WAN Gateway Address, Primary DNS Server and (if available) Secondary
DNS Server IP address as instructed by your ISP. Select the Connection Type used for
encapsulation and if you have been instructed to change the VPI number and VCI number,
type in the new values. In Australia, most users will use the default values VPI = 8 and
VCI = 35. In New Zealand, most users will use VPI = 0 and VCI = 100. Click Next when you
are ready to proceed to the Setup Completed menu.
Click the Next button. Skip ahead to the Setup Completed menu below.
If you have been told to change the
or VCI number,
Type the IP addresses for the
WAN IP
Mask, WAN Gateway
Primary DNS Server
Secondary DNS Server.
Select
9
Type the new values.
Address, WAN Subnet
Address,
and
the Connection
VPI
Type.