D-Link DSL-504G Quick Installation Manual page 10

Configuring the Router (continued)
Bridge Connections
If you selected the Bridge Mode connection type, select the Connection Type used for
encapsulation and if you have been instructed to change the VPI number and VCI number,
type in the new values. In Australia, most users will use the default values VPI = 8 and
VCI = 35. In New Zealand, most users will use VPI = 0 and VCI = 100. Click Next when you
are ready to proceed to the Setup Completed menu.
If you have been told to change the VPI
or VCI number, Type the new values.
Select the Connection Type.
Click the Next button. Skip ahead to the Setup Completed menu below.
10