Electronic Programme Guide (Epg); Connectivity Functions - Digihome 50278FHDDLEDCNTD Operating Instructions Manual

Electronic Programme Guide (EPG)

Some, but not all channels send information about the
current and next programmes. Press the
to view the EPG menu.
Up/Down/Left/Right: Navigate EPG.
OK: Displays programme options.
: Displays, in detail, information on the programme
selected.
GREEN: Switches to List Schedule EPG.
YELLOW: Switches to Timeline Schedule EPG.
BLUE: Displays filtering options.
Programme Options
In the EPG menu, press the OK button to enter the
Event Options menu.
Select Channel
In the EPG menu, using this option, you can switch
to the selected channel.
Set Timer / Delete Timer
After you have selected a programme in the EPG
menu, press the OK button and and the Options
screen will be displayed. Select the "Set Timer on
Event" option and press the OK button. You can set
a timer for future programmes. To cancel an already
set timer, highlight that programme and press the OK
button. Then select "Delete Timer" option. The timer
will be cancelled.
Note: It is not possible to record two channels at the same
time.

Connectivity Functions

Connecting to a Wired Network
For connecting to a wired LAN network, you
should perform the following steps:
• Connect broadband ISP connection ethernet cable
to the ETHERNET INPUT of your modem.
• Ensure that Nero Media Home software is installed
to your PC.(for DLNA function). See Appendix G for
more information on the installation process.
button
• Afterwards, you should connect your PC to the one
of your modem's LAN connectors (e.g. LAN 1) by
using a proper LAN cable.
• Use another LAN output of your modem (e.g. LAN
2) to enable the connection to your TV. You can add
your TV to your LAN by connecting the LAN port at
the rear of your TV to your modem's LAN connector
as illustrated.
• To access and play shared files, you must Select
Media Browser. Press Menu button and select Media
Browser by using Left or Right button. Press OK to
continue. Select the desired file type and press OK.
You must always use the Media Browser screen to
access and play shared network files.
• PC/HDD/Media Player or any other devices that are
DLNA 1.5 compatible should be used with wired
connection for higher playback quality.
To configure wired settings please refer Network
Settings section in Settings menu.
• You might be able to connect your TV to your LAN
network depending on your network's configuration.
In such a case, use an ethernet cable to connect
your TV directly to the network wall outlet.
English - 16 -